Electrostatic Powder Coating Machine
Electrostatic Powder Coating Machine
SKU:24015
This electrostatic powder coating machine has a large 45L powder capacity, which means it’s great for big projects. The T-Mech machine is fully portable, has an easy to navigate control panel and comes with a 12 month electrical warranty!
Powder coating is used to create a durable and high quality finish, which is great for tough machinery! Power coated products are more resistant to corrosion, fading and chipping so when done correctly it should last a very long time.
Powder coating is a dry finishing process using powder particles that are electrostatically charged and sprayed onto grounded metal work. After the coating is applied, you need to cure the parts using a powder coating curing oven.
Powder coating machines are used in a range of industries including auto parts, medical equipment, home appliances and much more!
Powder Coating Machine
- Product features:
- Easy to navigate control panel
- Includes 1 spray gun
- Comes on wheels making it fully portable
- 12 month electrical warranty
- CE Approved
- Dimensions: 74cm (H) x 65cm (W) x 50cm (D)
- Free next working day UK mainland delivery
Specifications:
- Input Power Voltage: 220V – 230V AC
- Frequency: 50Hz-60Hz
- Input Power: 40W
- Electromagnetic valve control power voltage: 24V DC
- Input Air Pressure: 0-0.6Mpa
- Output Air Pressure: 0-0.5Mpa
- Max. Air Consumption: 13.2m3/h
- Output Powder Volume: Max. 600g/min
- Output Powder Voltage: 0-100KV
- Output Current: 0-150uA
- Powder Hopper Volume: 45L
Electrical data
- Nominal input voltage: 200-240V
- Rated output voltage (to gun): 24V
- Rated output current (to gun): 1.2A
- Protection type: IP54
- Temperature range: 0 °C -+40 °C (+32 °F - +104 °F)
- Solenoid Valve Voltage: DC24V
- Gun output voltage: 0-100KV
- Gun output current: 0-150uA
Pneumatical data
- Max.input pressure: 0.8Mpa
- Min.input pressure: 0.5Mpa
- Output pressure: 0.8Mpa
- Max.water vapour content of the compressed air: 1.3g/m3
- Max.oil vapour content of the compressed air: 0.1mg/m3
- Max.compressed air consumption: 13.2m/h(0.4MPa)
Gun Parameter
- Input: 24V
- Voltage Frequency: Around 25KHZ
- Input Current: 1.2A
- Output Voltage: 0~100KV DC
- Max.Output powder volume:Around 600G/MIN
- Gun cable: 6M
- Gun weight: 460G
- Container Capacity: 45L
Operating Instructions
Powder coating should be undertaken by an experienced and competent person. This is in no way an exhaustive and complete guide of how to Powder Coat/Cure.
- You should wear a Tyvek suit/coveralls and gloves to protect your hands and skin. Eye protection and a dust mask should be worn at all times.
- Clean the base metal thoroughly and remove any rust or debris from the metal
- Use a high temperature masking tape on the parts you don’t want to be powder coated, this can be left on whilst in the oven but needs to be removed quickly afterwards
- Turn on the power supply switch and the indicator light should come on
- Adjust the voltage to what is required using the dials on the control panel
- Place powder into feeding barrel
- Press the switch of spray gun and adjust to high voltage
- Apply powder using spray gun
- After applying the powder, be careful not to brush or blow on the powder coat as the powder could fall off and leave you with a less precise finish
- Cure the metal using a powder coating curing oven, normally the object is heated to 175 to 190°C (350 to 375°F) for about 10 to 15 minutes, and allowed to cool